Are you looking for a scalable, compute-dense solution for high-performance workloads such as VDI, EDA, or CAD?
The HPE ProLiant DL360 Gen11 server is a rack-optimized 1U dense solution that delivers exceptional compute performance, upgraded high-speed data transfer rate, and memory depth with 2P compute capability. Powered by 4th Gen Intel® Xeon® Scalable processors with up to 60 cores, increased memory bandwidth, up to 8 TB of memory, and high-speed PCIe Gen5 I/O, the HPE ProLiant DL360 Gen11 server is a perfect rack-optimized, 1U 2P, dense solution for general-purpose virtualization workloads that require increased compute density with built-in security and flexibility.
The silicon root of trust anchors the server firmware to an HPE-exclusive ASIC, creating an immutable fingerprint for the Secure Intel Processor that must be matched exactly before the server will boot. The HPE ProLiant DL360 Gen11 server is an excellent choice for EDA, CAD, and VDI.
- Powered by 4th Gen Intel® Xeon® Scalable processors with next-generation technology that supports up to 60 cores at 350W, and 16 DIMMs for up to 8 TB of high bandwidth DDR5 memory up to 4800 MHz.
- 16 DIMMs per processor for up to 8 TB total DDR5 memory per server with increased performance, High Bandwidth Memory (HBM) support, and lower power requirements.
- Advanced data transfer rates and higher network speeds from the PCIe Gen5 serial expansion bus, with up to 2 x16 PCIe Gen5 and 2 OCP slots.
- Includes the new HPE Integrated Lights-Out 6 (iLO 6) server management software that enables you to securely configure, monitor, and update your HPE ProLiant Gen11 servers seamlessly, from anywhere.
- Supports up to 2 single wide (SW) GPUs1 to accelerate graphic intense workloads.
- Supports Smart Cooling Modules for highest thermal design points (TDPs).
Processor Type Intel®
Processor family 4th Generation Intel® Xeon® Scalable Processors
Processor core available 8 to 60 core, depending on processor.
Processor cache 12 – 60 MB L3, depending on processor
Maximum memory 4.0 TB per socket, when populated with 256 GB DDR5
Memory slots 16 DIMM slots per socket
Memory type HPE DDR5 SmartMemory
Memory protection features HPE Fast Fault Tolerant Memory
Advanced ECC Memory
Online Spare Memory
Drive supported Up to 4 LFF SAS/SATA HDDs or SSDs.
Up to 8+2 SFF SAS/SATA HDDs or SATA/SAS/NVMe U.3 SDDs, depending on model.
Up to 2x RAID 1 NVMe M.2 Boot device (Internal modular or external accessible from rear wall).
Infrastructure management Included – HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard (requires download).
Optional – HPE iLO Advanced, and HPE OneView Advanced.
System fan features Standard Fan Kit (Q’ty 5), Performance Fan Kit (Q’ty 7), Close Loop Liquid Cooling Heatsink & Fan kit, Direct Liquid Cooling & Fan Kit, depending on model.
Power supply type HPE 800W Flex Slot Platinum Hot Plug Power Supply, HPE 1000W Flex Slot Titanium Power Supply, HPE 1600W Flex slot Platinum Hot Plug Power Supply, HPE 1600W DC Power supply, HPE 1600W Flex Slot -48VDC Hot Plug Power Supply, HPE 1800W-2200W Flex Slot Titanium Hot Plug Power Supply, depending on model.
Expansion Slots Maximum 3 PCIe Gen5 slots and maximum 2 OCP 3.0 PCIe5 slots, for detail descriptions please see QuickSpecs.
Network Controller Wide range of speeds, cabling, chipsets and form factors (PCIe stand-up adapter and OCP3.0). Please see QuickSpecs for network card choices.
Storage controller Included – Embedded SATA controller (AHCI or Intel SATA software RAID controller)
Optional – HPE Smart Array Gen11 Storage Controller in Variety of protocols -including NVMe-, port count, array utilities, and form factors (PCIe stand-up adapter and OCP3.0). Please see QuickSpecs for storage controllers selection.
Warranty 3/3/3: Server Warranty includes three years of parts, three years of labor, and three years of onsite support coverage. Additional information regarding worldwide limited warranty and technical support is available at: https://h20564.www2.hpe.com/hpsc/wc/public/home. Additional HPE support and service coverage, to supplement the product warranty, is available. For more information, visit https://www.hpe.com/support
Processor number 1 or 2
Processor speed 3.7 GHz, maximum depending on processor.
Optical drive type Optional – HPE 9.5mm SATA DVD-RW Optical Drive, HPE Mobile USB DVD-RW Drive.
Security UEFI Secure Boot and Secure Start support.
Intel® Software Guard Extensions (SGX) support.
Immutable Silicon Root of Trust.
Optional Trusted Supply Chain, iLO Security modes, TPM, Chassis Intrusion detection and Bezel Locking kits.
DIMM capacity 16 GB to 256 GB